Automation
Advanced technology for automation capable of managing and controlling the entire transport cycle, from the loading of the propellant until reaching the destination chosen by the client.
The automation software is programmed to carry out the operations inherent to the loading, moving and washing phases; It is carried out according to the client's requirements and the characteristics of the plant, adapting to the most complex solutions.
The systemsAIR-TECThey have a patented technology for the dense phase pneumatic conveying of bulk materials, powders and granules.
-
They can have lengths exceeding 500 m and capacities greater than 100 tons/h.
-
The low transport speed allows to safeguard the quality and integrity of all types of material: fragile, abrasive, delicate, mixed or with a tendency to agglomerate.
-
Dense phase pneumatic conveying is characterized by a high product/air efficiency ratio. The indicative relationship between air (or other gaseous fluids) and product is as follows:
-
Dense phase: about 30 liters of transport gas per 1 kg of product.
The dense phase pneumatic transport allows economic savings and greater efficiency compared to traditional mechanical systems
Saving Economic
Quality
Flexibility
Cleaning
Efficiency
simplicity
test laboratory
The pilot plant ofAir-Tec Systemallows testing of customer-supplied materials, both powdered and granular, and verification of transport characteristics prior to implementation
The laboratory has adatabasewith more than 2,000 material samples and the corresponding parameters determined during the tests: air consumption, pressure, speed and conveying capacity (maximum volume), filling coefficient, material brittleness and further information on request.